Students are introduced to various types of energy with a focus on thermal energy and types of heat transfer as they are challenged to design a better travel thermos that is cost efficient, aesthetically pleasing and meets the design objective of keeping liquids hot. They base their design decisions on material properties such thermal conductivity, cost and function. These engineering and science concepts are paired with student experiences to build an understanding of heat transfer as it plays a role in their day-to-day lives. While this introduction only shows the top-level concepts surrounding the mathematics associated with heat transfer; the skills become immediately useful as students apply what they know to solve an engineering challenge.

Through a series of activities, students discover that the concept of mechanical advantage describes reality fairly well. They act as engineers creating a design for a ramp at a construction site by measuring four different inclined planes and calculating the ideal mechanical advantage versus the actual mechanical advantage of each. Then, they use their analysis to make recommendations for the construction site.

Maps are designed to allow people to travel to a new location without a guide to show the way. They tell us information about areas to which we may or may not have ever been. There are many types of maps available for both recreational and professional use. A navigator uses a nautical map, while an engineer might use a surveyor's map. Maps are created by cartographers, and they can be very specific or very general, depending on their intended use. The focus of this lesson is on how to read and use topographical maps. Students will also learn to identify the common features of a map. Through the associated activities, students will learn how to use a compass to find bearing to an object on a map and in the classroom.

In this activity, students will learn how to read a topographical map and how to triangulate with just a map. True triangulation requires both a map and compass, but to simplify the activity and make it possible indoors, the compass information is given. Students will practice converting a compass measurement to a protractor measurement, as well as reverse a bearing direction (i.e., if they know a tree's bearing is 100 degrees from you, they can determine what bearing they are from the tree). Students will use the accompanying worksheets to take a bearing of certain landmarks and then start at those landmarks to work backwards to figure out where they are.

In this activity, students will learn how to actually triangulate using a compass, topographical (topo) map and view of outside landmarks. It is best if a field trip to another location away from school is selected. The location should have easily discernable landmarks (like mountains or radio towers) and changes in elevation (to illustrate the topographical features) to enhance the activity. A national park is an ideal location, and visiting a number of parks, especially parks with hiking trails, is especially beneficial.

In this activity, students learn about creating a design directly from a CAD (computer-aided design) program. They will design a tower in CAD and manufacture the parts with a laser cutter. A competition determines the tower design with the best strength:weight ratio. Students also investigate basic structural truss concepts and stress concentrations. Partnership with a local college or manufacturing center is necessary for the completion of this project.

Student teams investigate the migration of small-particle plastic pollution by exposing invertebrates found in water samples from a local lake or river to fluorescent bead fragments in a controlled environment of their own designs. Students begin by reviewing the composition of food webs and considering the ethics of studies on live organisms. In their model microcosms, they set up a food web so as to trace the microbead migration from one invertebrate species to another. Students use blacklights and microscopes to observe and quantify their experimental results. They develop diagrams that explain their investigations—modeling the ecological impacts of microplastics.

Students simulate the spread of a virus such as HIV through a population by "sharing" (but not drinking) the water in a plastic cup with several classmates. Although invisible, the water in a few of the cups has already be tainted with the "virus" (sodium carbonate). After all the students have shared their liquids, the contents of the cups are tested for the virus with phenolphthalein, a chemical that causes a striking color change in the presence of sodium carbonate. Students then set about trying to determine which of their classmates were the ones originally infected with the virus.

This course discusses fundamental traffic flow characteristics and traffic flow variables. Their definitions are presented, and visualization/analysis techniques are discussed and empirical facts are presented. The empirical relation between the flow variables and the bottleneck capacity analysis are discussed. Shockwave analysis and a review of macroscopic traffic flow models are presented. Traffic flow stability issues are discussed as well as numerical solution approaches. The lectures also show how macroscopic models are derived from microscopic principles. This course provides an overview of human factors relevant for the behavior of drivers. The car-following model and other approaches to describe the lateral driving task will be discussed. The lectures also pertains to general gap acceptance modeling and lane changing. Microscopic models for pedestrian flow behavior are discussed and an in depth discussion of microscopic simulation models will be presented. The study goals of this course are to gain insight into theory and modeling of traffic flow operations, to learn to apply theory and mathematical models to solve practical problems and to gain experience with using simulation programs for ex-ante assessment studies.

Students learn about and use a right triangle to determine the width of a "pretend" river. Working in teams, they estimate of the width of the river, measure it and compare their results with classmates.

Students investigate the relationships between angles and side lengths in right triangles with the help of materials found in the classroom and a mobile device. Using all or part of a meter stick or dowel and text books or other supplies, students build right triangles and measure the angles using a clinometer application on an Android® (phone or tablet) or iOS® device (iPhone® or iPad®). Then they are challenged to create a triangle with a given side length and one angle. The electronic device is used to measure the accuracy of their constructions.

Students learn how to identify the major features in a topographical map. They learn that maps come in a variety of forms: city maps, road maps, nautical maps, topographical maps, and many others. Map features reflect the intended use. For example, a state map shows cities, major roads, national parks, county lines, etc. A city map shows streets and major landmarks for that city, such as hospitals and parks. Topographical maps help navigate the wilderness by showing the elevation, mountains, peaks, rivers and trails.

Students work within constraints to construct model trusses and then test them to failure as a way to evaluate the relative strength of different truss configurations and construction styles. Each student group uses Popsicle sticks and hot glue to build a different truss configuration from a provided diagram of truss styles. Within each group, each student builds two exact copies of the team's truss configuration using his/her own construction method, one of which is tested under shear conditions and the other tested under compression conditions. Results are compiled and reviewed as a class to analyze the strength of different types of shapes and construction methods under the two types of loads. Students make and review predictions, and normalize strengths. Teams give brief presentations to recap their decisions, results and analysis.

Tá Falado includes 46 podcast lessons on the pronunciation and grammar of Portuguese, specifically designed to help those who already speak Spanish. The lessons are built around Portuguese dialogs that are repeated in Spanish, providing a direct comparison of the two languages. All lessons include downloadable PDF files with the transcripts and notes, mp3 audio files, and blog discussions. Additionally all of the dialogs present cultural scenarios that illustrate differences between North American and Brazilian culture.

Three-part unfolding case of a hospitalized older adult demonstrating impact of unrecognized cognitive disturbances and use of standardized assessment instruments to guide recognition.
Instruments featured include the AD-8, the Geriatric Depression Scale and the Montreal Cognitive Assessment. The role of interprofessional collaboration to reduce care fragmentation is also featured.

The lectures will discuss characteristics of urban water flows, hydraulics, hydrology and how to apply knowledge of these phenomena to the design and analysis of urban water systems. Integration of various scientific disciplines and technological and practical approaches is a central theme in this course.

Students will design an urban drainage system for a real case in the Netherlands or abroad using the Rational Method. They will use this design as input for a hydrodynamic computer model and perform model calculations for various conditions to check the performance of the designed system and improve where needed. They will prepare a written report of their data, design choices and results and present main results in a plenary session that concludes the lecture series.

This lesson is connected to but can be used independently of "Using Big Data to Identify and Understand Educational Inequality in America (1)"

Students will develop CS skills and behaviors including but not limited to: learning what an API is, learning how to access and utilize data on an API, and developing their R coding skills and knowledge. Students will also learn basic, but important, sociological principles such as how poverty is related to educational opportunities in America (and how this relationship varies between and among states). Although prior knowledge of CS and sociology is helpful, neither is necessary for student (or instructor) success on this project. Three instructional hours.