Updating search results...

Search Resources

226 Results

View
Selected filters:
  • Delft University of Technology
Breakwaters and Closure Dams
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

Design and construction of breakwaters and closure dams in estuaries and rivers. Functional requirements, determination of boundary conditions, spatial and constructional design and construction aspects of breakwaters and dams consisting of rock, sand and caissons.

Subject:
Engineering
Environmental sciences
Physical Science
Material Type:
Assessment
Lecture Notes
Reading
Textbook
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Ir. H.J. Verhagen
Date Added:
03/03/2016
Buckling of Structures
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

The course is concerned with the concept of structural stability. This concept is applied to discrete and continuous basic structural elements (beams, frames, plates and shells). The fundamental concepts are introduced on the basis of the governing differential equations. The course includes the following topics:

*Equations of motion, nonlinear equilibrium equations, stationary potential energy criterion.
*Stability analysis for the basic structural elements.
*Design methods for stability of basic structural elements.

Subject:
Engineering
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr.ir. R. de Breuker
Date Added:
01/12/2021
The Building Blocks of a Quantum Computer: Part 1
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

There is no doubt that the quantum computer and the quantum internet have many profound applications, they may change the way we think about information, and they could completely change our daily life.

But how do a quantum computer and a quantum internet work? What scientific principles are behind it? What kind of software and protocols do we need for that? How can we operate a quantum computer and a quantum internet? And which disciplines of science and engineering are needed to develop a fully working system?

In a series of two MOOCs, we will take you through all layers of a quantum computer and a quantum internet. The first course will provide you with the scientific basis by explaining the first layer: the qubits. We will discuss the four types of qubits that QuTech research center at Delft University of Technology focuses on: topological qubits, Spin qubits, Trans qubits and NV Centre qubits. We will teach you the working principles of qubits and, at the same time, the working principles of a computer made of these qubits.

In the upcoming second course, we will introduce the other layers needed to build a quantum computer and a quantum internet, such as the micro-architecture, compilers, quantum error correction, repeaters and quantum algorithms.

These two courses offer you an opportunity to deepen your knowledge by continuing the journey started in our first MOOC, which focused on the applications of a quantum computer and a quantum internet.

Note that these courses offer a full overview of the layers of a quantum computer and a quantum internet, and therefore they will not go into too much detail per layer. For learners seeking to fully understand one specific topic we can recommend other courses authored by QuTech:

Subject:
Engineering
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Prof.L. DiCarlo
Prof.dr. Lieven Vandersypen
Prof.dr.ir. K.L.M. Bertels
Stephanie Wehner
dr.ir. Menno Veldhorst
Date Added:
01/12/2021
The Building Blocks of a Quantum Computer: Part 2
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

There is no doubt that the quantum computer and the quantum internet have many profound applications, they may change the way we think about information, and they could completely change our daily life.

But how do a quantum computer and a quantum internet work? What scientific principles are behind it? What kind of software and protocols do we need for a quantum computer and a quantum internet? Which disciplines of science and engineering are needed to develop these? And how can we operate a fully working system?

In this series of two courses, we take you through all layers of a quantum computer and a quantum internet. In part 1 we explained the first layer: the qubits. We introduced the most promising quantum platforms and discussed how to do quantum operations on the physical qubits. In part 2 we will introduce the other layers needed to build and operate a quantum computer and a quantum internet, such as the quantum classical interface, micro-architecture, compilers, quantum error correction, networks and protocols and quantum algorithms.

These two courses offer you an opportunity to deepen your knowledge by continuing the journey started in our first course, which focused on the applications of a quantum computer and a quantum internet.

Note that these courses offer a full overview of the layers of a quantum computer and a quantum internet, and therefore they will not go into too much detail per layer. For learners seeking to fully understand one specific topic we can recommend other courses authored by QuTech:

In the field of Quantum Internet: Quantum Cryptography
In the field of topological phenomena: Topology in Condensed Matter
This course is authored by experts from the QuTech research center at Delft University of Technology. In the center, scientists and engineers work together to enhance research and development in quantum technology. QuTech Academy’s aim is to inspire, share and disseminate knowledge about the latest developments in quantum technology.

Subject:
Engineering
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr. C.G. Almudever
Dr. D. Elkouss
Dr. D.B. Criger
Dr. F. Sebastiano
Prof. B.M. Terhal
Prof.dr.ir. K.L.M. Bertels
Date Added:
01/12/2021
Building Information - Representation and Management: Fundamentals and Principles
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

The book presents a coherent theory of building information, focusing on its representation and management in the digital era. It addresses issues such as the information explosion and the structure of analogue building representations to propose a parsimonious approach to the deployment and utilization of symbolic digital technologies like BIM.

Subject:
Information Science
Material Type:
Textbook
Provider:
Delft University of Technology
Author:
Alexander Koutamanis
Date Added:
01/12/2021
Business Model Implementation
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

Designing a new business model is one thing, but how do you actually put it into practice? How do you move from your current model to a new business model?

In this business and management course, you will learn how to make a practical action plan to implement your new business model.

You will create a business model roadmap that will include practical activities that take into consideration the possible risks associated with moving to a new business model.

You will also learn about the practical factors that need to be taken into consideration during the transition process, i.e. the competency of your people and your IT, in order to successfully implement a new business model.

Subject:
Business and Marketing Education
Engineering
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Harry Bouwman
Mark de Reuver
Timber Haaker
Date Added:
01/12/2021
Business Model Metrics and Advanced Tools
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

Do you want to enhance your business model by creating a clear focus or implement your new business model innovation into your IT?

In this business and management course, we will discuss business model agility and how specific business model metrics will help you focus on the overall goals of our business.

You will also learn about advanced tools to help support the bridge between business model thinking and IT implementation.

Subject:
Business and Marketing Education
Engineering
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr.ir. G.A. de Reuver
Dr.ir. T.I. Haaker
Prof.dr. W.A.G.A. Bouwman
Date Added:
01/12/2021
Business Model Testing
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

The world is changing rapidly and full of uncertainties. The future success of a business model depends on how well it is adapted to changing circumstances. Do you want to become aware of the relevant developments in technology, markets and society? And understand how this affects your business?

This business and management course will teach you how to stress test your business model. You will learn how to identify the relevant trends and uncertainties and how they impact your business model. You will analyse the strong and weak parts of your business model and look for opportunities to make your business model more robust and future proof.

You will learn through real-world examples from well-known companies and interact with fellow entrepreneurs. By the end of this course, you will be able to stress test your own business model to analyse its future success.

Subject:
Business and Marketing Education
Engineering
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr.ir. G.A. de Reuver
Dr.ir. T.I. Haaker
Prof.dr. W.A.G.A. Bouwman
Date Added:
01/12/2021
Caleidoscoop
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

Tijdens de cursus Caleidoscoop worden verschillende aspecten belicht waarmee de eerstejaarsstudenten worden voorzien van basisvaardigheden en basiskennis die noodzakelijk zijn voor het succesvol volgen van een studie in de wiskunde.

Subject:
Mathematics
Material Type:
Lecture
Lecture Notes
Reading
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr. K.P. Hart
Date Added:
01/12/2021
Cavitation on Ship Propellers
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

Summary: Cavitation is the transition of a fluid into vapour due to local reduction of pressure which is generated by high local flow velocities. The transition of a fluid into vapour also occurs during cooking of water by an increase of the local temperature. The term cavitation is generally reserved for conditions in which the temperature of the bulk fluid is not changed. Although cavitation can occur in many situations this course focuses on ship hydrodynamics and ship propellers. The course is divided into five main groups: physics, types and effects of cavitation as well as calculations and test facilities and techniques. Some of these topics are illustrated with the use of videos. (Study goals:) 1. Reproduce the main lines in a selection of the latest developments in the field of propulsion and resistance hydrodynamics, where the current selection of propulsion and resistance topics includes unsteady hydrodynamics of the flow over a foil, cavitation forms, problems and tools for analysis and design, propulsion systems in a service environment and ship drag reduction by air lubrication. 2. Analyse a hydrodynamic problem in the propulsion and resistance area, into well defined sub problems that can be analysed with state of the art knowledge and tools 3. Select the appropriate theory or tool (either numerical or experimental) for an analysis of the identified problem. 4. Reproduce and present to an audience, the main lines in a contemporary publication from the field of Propulsion and Resistance hydrodynamics. 5. Understand, interpret and react to questions from the audience and the lecturer and in doing so, stimulate the scientific debate.

Subject:
Engineering
Material Type:
Lecture
Reading
Textbook
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
T.J.C. van Terwisga
Date Added:
02/04/2016
Circular Economy
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

Our global society is not sustainable. We all know about the challenges we’re facing: waste, climate change, resource scarcity, loss of biodiversity. At the same time, we want to sustain our economies and offer opportunities for a growing world population. This course is about providing solutions we really believe in: a Circular Economy.

In this course we explore the Circular Economy: how businesses can create value by reusing and recycling products, how designers can come up with amazingly clever solutions, and how you can contribute to make the Circular Economy happen.

Subject:
Engineering
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr. D.P. Peck
Ken Webster
Prof.dr.ir. C.A. Bakker
Date Added:
01/12/2021
Circular Economy for a Sustainable Built Environment
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

Building construction is one of the most waste producing sectors. In the European Union, construction alone accounts for approximately 30% of the raw material input. In addition, the different life-cycle stages of buildings, from construction to end-of-life, cause a significant environmental impact related to energy consumption, waste generation and direct and indirect greenhouse gas emissions.

The Circular Economy model offers guidelines and principles for promoting more sustainable building construction and reducing the impact on our environment. If you are interested in taking your first steps in transitioning to a more sustainable manner of construction, then this course is for you!

In this course you will become familiar with circularity as a systemic, multi-disciplinary approach, concerned with the different scales, from material to product, building, city, and region.

Some aspects of circularity that will be included in this course are maximizing reuse and recycle levels by closing the material loops. You will also learn how the Circular Economy can help to realign business incentives in supply chains, and how consumers can be engaged and contribute to the transition through new business models enabling circular design, reuse, repair, remanufacturing and recycling of building components.

In addition, you will learn how architecture and urban design can be adapted according to the principles of the Circular Economy and ensure that construction is more sustainable. You will also learn from case studies how companies already profitably incorporate this new theory into the design, construction and operation of the built environment.

Subject:
Architectural engineering
Engineering
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
A. Sabbe
Dipl.ing. U. Hackauf
Dr. A. Wandl
Dr.ing. M. Bilow
Dr.ing. T. Konstantinou
Dr.ir. E. Leclercq
Ir. M. Smit
Prof.dr.ir. T. Klein
Date Added:
01/12/2021
Citizens Co-creating Sustainable Cities
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

Around the world, major challenges of our time such as population growth and climate change are being addressed in cities. Here, citizens play an important role amidst governments, companies, NGOs and researchers in creating social, technological and political innovations for achieving sustainability.

Citizens can be co-creators of sustainable cities when they engage in city politics or in the design of the urban environment and its technologies and infrastructure. In addition, citizens influence and are influenced by the technologies and systems that they use every day. Sustainability is thus a result of the interplay between technology, policy and people’s daily lives. Understanding this interplay is essential for creating sustainable cities. In this MOOC, we zoom in on Amsterdam, Beijing, Ho Chi Minh City, Nairobi, Kampala and Suzhou as living labs for exploring the dynamics of co-creation for sustainable cities worldwide. We will address topics such as participative democracy and legitimacy, ICTs and big data, infrastructure and technology, and SMART technologies in daily life.

Subject:
Architectural engineering
Engineering
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Huub Rijnaarts
Date Added:
01/12/2021
Civil Engineering in Developing Countries
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

Based on working on exercises on project decision making and planning, the specific context of working abroad in general and in developing countries in particular is illustrated, with regard to socio-cultural aspects, planning and financing of projects, roles of (consulting) engineers and contractors, local materials, techniques and knowledge and environmental issues.

Subject:
Engineering
Environmental sciences
Physical Science
Material Type:
Activity/Lab
Assessment
Lecture Notes
Reading
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
M.W. Ertsen
Date Added:
02/04/2016
Communicating Effectively: How to Inspire and Convince
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

In order to be effective, leaders need a high tolerance of complexity. Beyond this, they need to inform their people and the outside world of their strategies, policies and decisions. Effective leaders are often inspiring communicators – their own high tolerance of complexity helps them reduce this complexity to a concise and powerful message.

Your sensemaking mindset is therefore of critical importance to motivate others to follow and support you. Your ability to inspire and convince is largely dependent on the way you frame your message, and on your skills at playing the game of framing and reframing. You will learn from a large variety of (video) cases and analyse a large number of situations where leaders’ communication and sensemaking skills are tested and probed. This will ensure that you are equipped to build winning coalitions in your own organization.

Subject:
Business and Marketing Education
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Drs. Jet Pagnier
Prof.dr. Hans de Bruijn
Date Added:
01/12/2021
Creative Problem Solving and Decision making
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

Explore complex, multi-actor systems in which one factor influences all other factors. For instance, how innovative energy technologies merge into the existing energy system, or how new transport possibilities impact current processes. Armed with this information, learn to decide whether they should be further developed, consider possible negative results and weigh associated costs.

There are multiple ways to make decisions, but one way proven to be very useful is the analytical approach – a methodology for making the problem explicit and rationalising the different potential solutions. In short: analysis based support of decision making, design and implementation of solutions.

Creative Problem Solving and Decision Making as a course teaches you this method.

Subject:
Engineering
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr.ir. C. van Daalen
Prof. A. de Haan
Date Added:
01/12/2021
Cyber Security Economics
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

This economics course provides an introduction to the field of cybersecurity through the lens of economic principles. Delivered by four leading research teams, it will provide you with the economic concepts, measurement approaches and data analytics to make better security and IT decisions, as well as understand the forces that shape the security decisions of other actors in the ecosystem of information goods and services.

Systems often fail because the organizations that defend them do not bear the full costs of failure. In order to solve the problems of growing vulnerability to computer hackers and increasing crime, solutions must coherently allocate responsibilities and liabilities so that the parties in a position to fix problems have an incentive to do so. This requires a technical comprehension of security threats combined with an economic perspective to uncover the strategies employed by cyber hackers, attackers and defenders.

Subject:
Computer Science
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr. Ir. Carlos Hernandez Gañán
Dr. Rainer Böhme
Dr. Tyler Moore
Prof.dr. Michel van Eeten
Prof.dr. Ross Anderson
Date Added:
01/12/2021
Data Analysis: Building your own Business Dashboard
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

Are you ready to leave the sandbox and go for the real deal? Have you followed Data Analysis: Take It to the MAX() and Data Analysis: Visualization and Dashboard Design and are ready to carry out more robust data analysis?

In this project-based course you will engage in a real data analysis project that simulates the complexity and challenges of data analysts at work. Testing, data wrangling, Pivot Tables, sparklines? Now that you have mastered them you are ready to apply them all and carry out an independent data analysis.

For your project, you will pick one raw dataset out of several options, which you will turn into a dashboard. You will begin with a business question that is related to the dataset that you choose. The datasets will touch upon different business domains, such as revenue management, call-center management, investment, etc.

Subject:
Engineering
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr. Felienne Hermans
Date Added:
01/12/2021
Data Analysis: Take it to the MAX
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

This course is for all of those struggling with data analysis. That crazy data collection from your boss? Megabytes of sensor data to analyze? Looking for a smart way visualize your data in order to make sense out of it? We’ve got you covered!

Using video lectures and hands-on exercises, we will teach you cutting-edge techniques and best practices that will boost your data analysis and visualization skills.

This course has been awarded with the Wharton-QS gold education award in the category Regional awards Europe.
We will take a deep dive into data analysis with spreadsheets: PivotTables, VLOOKUPS, Named ranges, what-if analyses, making great graphs – all those will be covered in the first weeks of the course. After that, we will investigate the quality of the spreadsheet model, and especially how to make sure your spreadsheet remains error-free and robust.

Finally, once we have mastered spreadsheets, we will demonstrate other ways to store and analyze data. We will also look into how Python, a programming language, can help us with analyzing and manipulating data in spreadsheets.

This course is created using Excel 2013 and Windows. Most assignments can be made using another spreadsheet program and operating system as well, but we cannot offer full support for all configurations.

Subject:
Engineering
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr. Felienne Hermans
Date Added:
01/12/2021
Data Analysis: Visualization and Dashboard Design
Conditional Remix & Share Permitted
CC BY-NC-SA
Rating
0.0 stars

Struggling with data at work? Wasting valuable time working in multiple spreadsheets to gain an overview of your business? Find it hard to gain sharp insights from piles of data on your desktop?

If you are looking to enhance your efficiency in the office and improve your performance by making sense of data faster and smarter, then this advanced data analysis course is for you.

If you have already sharpened your spreadsheet skills in Data Analysis: Take It to the MAX(), this course will help you dig deeper. You will learn advanced techniques for robust data analysis in a business environment. This course covers the main tasks required from data analysts today, including importing, summarizing, interpreting, analyzing and visualizing data. It aims to equip you with the tools that will enable you to be an independent data analyst. Most techniques will be taught in Excel with add-ons and free tools available online. We encourage you to use your own data in this course but if not available, the course team can provide.

These course materials are part of an online course of TU Delft. Do you want to experience an active exchange of information between academic staff and students? Then join the community of online learners and enroll in this MOOC. This course is part of the Data Analysis XSeries.

Subject:
Business and Marketing Education
Engineering
Material Type:
Full Course
Provider:
Delft University of Technology
Provider Set:
Delft University OpenCourseWare
Author:
Dr. Felienne Hermans
Date Added:
01/12/2021